background image

 

 

 

©

2

0

2

0

 In

te

llig

ent

 D

ig

ita

l S

er

vic

es

 G

mbH

 V

e

rs

io

1

.0

 

 

Press the [SEND] button of the freshly generated “On” command. If the 
power socket recognized this signal successfully, the LED will stop blinking, 
learning is complete.

 

In case you need to unlearn a command on a power socket, please refer to chapter 
4.2.

 

10.2

 

IR commands

 

The Infrared commands will be trained in a similar way, except there is no need to 
choose between a switch or a socket before learning.

 

 

Open one of the cards by clicking on the down-arrow.

 

 

Press the [Learn] button on the card.

 

 

Now take your RCU and point with it to the top of the Gateway housing, 
then press the RCU button that you want to be learned; If the command is 
recognized by the Gateway device, the [SAFE] and [SEND] buttons will be 
activated.

 

 

If learning is not successful, an error message in

 red

 will be shown; try 

again.

 

 

Click on the [SEND] button for testing the function of the newly learned 
command.

 

 

Click on the text input line and type in a useful name for this command, 
then press [SAFE].

 

 

If you need to delete one of the learned commands, use the 
corresponding [CLEAR] button.

 

 

 

 

Summary of Contents for Core Smart Home Gateway V1






















































Reviews: