Mounting Instructions
Mounting the lens tube with Ø 41 mm
IDS Imaging Development Systems GmbH
Dimbacher Str. 10 · 74182 Obersulm · Germany · T: +49 7134 96196-0 · E: [email protected]
www.ids-imaging.com
•
•
1.
2.
Note on IP 65/67
The GigE uEye FA/RE PoE housing version is IP 65/67 compliant. The following requirements must be met
for conformance to the
IP 65/67
standards:
A lens tube must be connected.
Cables must be attached to both connectors during operation. See also the technical manual of the
camera.
NOTICE!
The camera has not been approved for underwater use.
Dismounting the lens tube
When dismounting the lens tube, make sure that no dust or water can get in the camera housing. Proceed as
follows:
Dismount the lens tube.
Dismount your lens.
Status: 2022-10-12
