+44 (0)1635 294600 | [email protected] | www.i-lcd.com
Intelligent Display Solutions
, Unit 2, Berkshire Business Centre,
Berkshire Drive, Thatcham, Berkshire, RG19 4EW
A division of Intelligent Group Solutions Ltd
QUIC
K S
TAR
T GUIDE
»
AM-800
480N6TZQW
-T06H
© IGS Version V1
7 of 9
PART 2: CONNECTING THE TOUCH PANEL
Locate CN4 on the PCB and carefully lift up the flap.
Note the orientation of the FFC and the PCB, it must be connected the correct way round or damage may occur. Push the FFC tail into
the connector far enough so that the dark strengthening section is all the way in, and close the flap.
Turn the PCB over and connect a USB Mini lead.