Safety
This equipment should be operated by trained personnel and maintained by certified
professionals. The equipment is intended for non-treated lumber only and should not be
used for any other purpose. Any modifications of the equipment or use of unauthorized parts
is forbidden unless approved by the original manufacturer. Any electrical or plumbing work
performed on this installation should be performed by certified professionals working to
local codes.
Safety warnings are noted in each section; example below:
The following machine specifications are for iDRY Turbo Lumber Dryers:
Specifications - Turbo
WARNING: THE VOLTAGES INSIDE THE CONTROL BOX ARE HIGH ENOUGH TO
CAUSE DEATH IF YOU COME IN CONTACT WITH THEM.
iDRY Turbo User Manual
© 2021 iDRY, LLC
5
Main Power
480 VAC, 3 Phase, 60HZ, 60 Amps
Water Supply
Managed Water @ 70 Deg F / 21 C or less with avg flow of 0.75 Gallons
per Minute / 2.8 Liters per minute, MIN 50 PSI
Water Chemistry
Managed water is water that is safe for use with Aluminum and routinely
checked and tested.
Drains
Air Gap (included) required - 2inch / 51mm PVC Connection (2 drains)
Installation Environment
Above freezing dry space. For best operating performance ambient
temperature should be kept at 70 F / 15.5 C
Remote Connection
Ethernet Cable 200 Feet / 60 Meters max
Lumber Load Capacity
21ft long x 64 inches wide x 67 inches tall
Equipment Weight
Kiln and components: 16,500lbs
Heating Plates: 9,840lbs