5
II - Getting Started
Appearance and Key Function
1. Battery
Initially the battery will be around 50% charged and can be used immediately after unpacking. However for the
first cycles, it is strongly recommended to let the battery completely run out before charging again, to allow the
device to achieve its optimum capacity.
1.1
Battery Removal and Installation
Installing the battery:
Contact one end of the battery to the connecting grooves until the battery completely snaps in to place in the
battery box.
Removing the battery:
Remove the back cover of the phone and gently remove the battery from the battery compartment.
1.2
Battery Charging
When your phone is charging there will be a charge level indicator in the shape of an icon on the phone screen. If
charging with the phone powered off the screen will show the charging indicator. If the battery is sorely depleted
the icon may take a few seconds to appear on the screen.
When the battery is fully charged the charging icon disappears to indicate that the battery is fully charged. If
charging while the phone is powered off, the screen also displays that the charging is complete. During charging,
the batteries, cell phone and charger heat up; this is normal.
After charging, disconnect the AC power outlet and phone charger connections.
**Note: It is recommended that the device be placed in an ambient temperature when charging; -10
℃
~ +55
℃
; in
a well-ventilated place, and to be sure to use the charger provided by the manufacturer. Use of unapproved
charger may be dangerous, and it is also a breach of the warranty terms and conditions specified by the
manufacturer. If the charging temperature is too high or too low, the phone will automatically go in to alarm mode
and stop charging to prevent damage to the battery.
