19
Rev. 00 - 04/2014
1 - APPLICATIONS
The following are excluded from the warranty: accidental damage due to transport, negligence or inap-
propriate treatment, incorrect or improper use or installation, i.e. not complying to the instruction ma-
nual, and any situations that do not depend on machine standards and operation, or on electrical and
equipment use. The warranty is invalidated if the equipment is repaired or tampered with by unauthorized
third parties. The equipment shall not be replaced nor the warranty extended after it has been repaired for
faults. The warranty does not cover cleaning the working parts or replacing consumable components such
as pump oil, nozzle, etc.
IDROBASE GROUP SRL is not liable for any damage to persons or objects due
to incorrect installation or improper use of the equipment.
1.4
CONDITIONS FOR RETURNS
It will be the responsibility of the end user to return the product to the retailer; or telephone for further
information to the number
+39 049 9335136
1.5
CASES IN WHICH THE MANUFACTURER IS NOT LIABLE
The manufacturer is not liable for damage caused by the following:
•
Improper use of the machine or use by untrained people.
•
Use of non genuine spare parts.
•
Non-compliance with maintenance.
•
Unauthorized modifi cations or operation.
•
Non-observance, in total or part, of the instruction manual.
•
Non-observance, in total or part, of the safety regulation in force in the country where the machine is
used.
1.6
SAFETY
The CIELO is well-advanced from a technical point of view and for a proper installation, good operation,
proper use and maintenance, it needs trained, responsible staff who has to comply with the following rules
of safety and conduct.
•
Do NOT
expose the machine to freeze and the outside weather in general. Freezing can cause severe
damages to the pump and circuit. The prolonged downtime at temperatures below 0°C (zero Celsius
degrees) can cause damages or break pump and pipes, it is better to do a complete emptying;
•
The electrical system connected to the machine
MUST
be made in compliance with the laws in force in
the country of installation;
•
It is
RECOMMENDED
the presence of a diff erential circuit breaker, with a sensitivity of 30 mA above the
socket or power plant;
•
Do NOT
use extension cords or loose plugs;
•
The integrity and insulation of the electric cable and equipment
MUST
be checked, because the work
environment is necessarily exposed to water and humidity conditions that preclude the natural system
insulation;
•
Do
NOT
use the machine if the cable is damaged or worn; disconnect the device from the network and
contact an authorized service center;
•
You
MUST
follow the rules imposed by the Fire Department or by local entrusted bodies.
•
Do
NOT
touch the plug with wet hands or feet!
•
Avoid accidental operation. You
MUST
place the switch OFF before inserting or removing the plug from
the socket;
•
Do
NOT
pull the cord to remove the plug;
Rev. 00 - 04/2014
