32
6 - ASSEMBLY AND INSTALLATION
GB
A
B
C
H2O
ASSEMBLING
BLISTER
PACKAGING
A + B+ C
1. PLACE THE TOWER HORIZONTALLY
AND ON THE SIDE OF THE BASE IN
RATTAN.
6. FIX THE TOWER TO THE BASE
TIGHTENING SCREWS (KIT A).
7. INSERT THE HOLE CAPS (KIT A).
8. INSERT THE CENTERING PINS IN THE
TWO SEMI-TABLES (KIT B).
9. JOIN THE TWO SEMI-TABLES
POSITIONED ABOVE THE BRACKETS
ATTACHED TO THE RATTAN TOWER.
10. FIX SEMI-TABLES TIGHTENING THE
SCREWS (KIT C).
2. OPEN THE DOOR OF THE BASE IN
RATTAN AND PULL OUT THE TANK.
5. CONNECT WHITE PIPE OF THE WATER
TO THE MISTING DEVICE AND CLOSE THE
DOOR OF THE RATTAN BASE.
11. SCREW THE NOZZLES
3. INSERT INTO THE CENTER HOLE OF THE
RATTAN BASE, ELECTRIC CABLES AND
WHITE PIPE OF THE WATER.
4. CONNECT THE CABLES OF THE LIGHTS
AND HEATER.
THE ASSEMBLY MUST BE MADEIN TOTAL SAFETY. IT
IS THE RESPONSIBILITY OF THE INSTALLER ENSURE
THE SAFETY OF PERSONNEL.
Cop
yrigh
t ©2015 I
dr
obase G
roup
. A
ll righ
ts r
eser
ved
.
