iDrive Portable 20GB HDD
User’s Manual
- 3 -
Copyright Statement
It is a criminal offense, under applicable copyright laws, to make unauthorized copies of
copyright-protected material, including computer programs, films, broadcasts and sound
recordings. This equipment should not be used for such purposes.
Notice:
I/OMAGIC Corporation make no warranty of any kind with regards to this material, including, but
not limited to, the implied warranties of merchantability and fitness for a particular product.
I/OMAGIC Corporation shall not be liable for errors contained herein or for incidental consequential
damages in connection with the furnishing, performance, or use of this material.
Every effort has been made to ensure that the information in this manual is accurate. I/OMAGIC
Corporation is not responsible for printing or clerical errors.
Mention of third party products is for information purposes only and constitutes neither an
endorsement nor a recommendation. I/OMAGIC Corporation assume no responsibility with regards
to the performance of these products.
This document contains proprietary information, which is protected by copyright (see below).
The information contained in this document is subject to change without notice.
Trademarks:
Microsoft is a registered trademark of Microsoft Corporation. Windows, Windows
XP/2000/ME/98/95/NT and their logos are trademarks of Microsoft Corporation. IBM is a registered
trademark of International Business Machines Corporation. All other trademarks and product
names used within this manual are the property of their respective companies and are hereby
acknowledged.
Copyright:
© 2002 I/OMAGIC Corp. all rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language or computer
language, in any form, by any means, without prior written consent of I/OMAGIC.
Warranty:
I/OMAGIC Corporation warrant that the products it sells will be free from defects in materials and
workmanship. Consult the warranty card for complete warranty information.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•
This device may not cause harmful interference
•
This device must accept any interference received, including interference that may cause
undesired operation.
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
emit radio frequency energy and, if not installed or used in accordance with the instructions, may
cause interference to radio communications. However, television reception interference can be
determined by turning the equipment off and on. The user is encouraged to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and the receiver
•
Connect the equipment into an outlet different from that to which the receiver is
connected
•
Consult the dealer or an experienced radio/TV technician for help.
Caution
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
For Europe
“The drive is in conformity with the EMC directive and low-voltage directive.”