14
4. Press “
+
,
-
” to change. Press “Shutter” button and exit.
(b)
Speaker
1. You can set the build-in speaker on or off. Set
the beep sound on or off.
2. You can select through “
+
,
-
” Press “Shutter” to
confirm and exit.
(c)
Language
1. Enter the language.
2. This machine support Chinese/English.
3. You can select through “
+
,
-
” Press “Shutter” to
confirm and exit.
(d)
Storage
1. Enter the storage.
2. You can find Nand flash/SD card/PC-DEVICE. You can convert storage.
3. But don’t increase together. Select the different
storage through “+,-”.
4. Press “Shutter” button to confirm and exit.
Note: When connect the outside U-disk,
need to USB cable to transfer. Then read or right.
(e)
TV-out
1. Enter into the TV-out. Connect the PMP with TV.
2. Select the TV-PAL or TV-NTSC mode to receive the signal.
3. Then, the TV display replaces the Mp4 display. (Also the Mp4 screen is
black) If there are no TV signal.
4. Don’t select the PAL/NTSC to enter!
LCD
5. Select LCD through “
+
,
-
” Press “Shutter” button
to confirm!
6. Then the PMP LCD can display.
(f)
Default
