20
(4) Install a ribbon into the ribbon
cartridge as the right picture.
Figure 15 Loading the ribbon 1
(5) Insert the supply side of the ribbon
to no.1 hole and press the opposite
(no.2). Insert the take-up side of the
ribbon same method to no.3 and no.4.
After inserting, tighten the ribbon.
(Caution! If the ribbon is not tightened, a rolling
up error might be happened.)
Figure 16 Loading the ribbon 2
(6) Install the disposable cleaning roller
to the ribbon cartridge.
Figure 17 Installing the cleaning roller
①
②
③
④
