41
SBS Only:
Please enable it when you issue cards with software programed by SDK. This
option disables printer device driver.
Safe Head Heat:
Set not to print if the print head is overheated.
Cleaning Warning:
Set to show the ‘Do cleaning’ message periodically
Use USB Serial:
When SMART-31 is connected to USB, it transmits the USB serial
number to PC. Default is the same number used by all SMART-31. Please set this option
when you use multiple SMART-31 printers connected to 1 PC via USB. It enables unique
serial numbers for each USB.
Mag. Head Position:
SMART-31 can install the magnetic encoder on upper/lower side of a
card. You can set it depending on the position of encoder.
Card Out:
Set the way to eject cards.
Error Card Out:
Set the way to eject error cards.
Auto Front Card In:
Set to input a card automatically if the front card-in sensor detects a
card
.
It is used for the KIOSK model.
Auto Rear Card In:
Set to input a card automatically if the rear card-in sensor detects a
card. It is used for the KIOSK model.
Dump Mode:
It records log data to inspect the operation of printer.
User Mag. Current:
The default current value when the user selects to use the defined
value when magnetic encoding
Mag. Write Mode:
You can order the way how to encode magnetic stripe.
“L:A, H:I”: encodes 3 tracks at once for LoCo card and encodes at twice by dividing 1,3 and
2 track for HiCo card.
Magnetic Start Position:
Set the start position of magnetic stripe when you encode.
Card In Speed:
set the speed of inputting a card
Card Move Speed:
set the speed of moving a card
Card Eject Speed:
set the speed of ejecting a card
