2. Adjust the Height of the LED Light Panel
Rotate the knob on the back of the rod and pull the upper rod
section to adjust the height.
Do not pull the lower rod section. It is designed to be firmly
attached to the water tank.
Tip: When planting a new seed pod, set the light
panel to the lowest possible position.
3. Add Water & Nutrients
Water
Rotate to open the lid of the water inlet and pour
tap water
or
distilled water.
For better results, keep the water level above 4L. Keep in mind to
add water while adding a proportionate amount of nutrients.
Notice: Do not use well water as it may interfere with the nutrients,
or softened water as it may contain sodium contents that are
harmful to plants.
Nutrients
1. Add room-temperature tap water or bottled distilled water to nutrient A and shake until well mixed.
2. Add room-temperature tap water or bottled distilled water to nutrient B and shake until well mixed.
3. Add 5ml solution A and 5ml solution B while adding 1L water into the tank.
Note:
1. Adding too much nutrient solution can be harmful to your plants.
2. Do not use well water or softened water. Most well water contains a large number of dissolved
solids that may disrupt the balance of nutrients, and softened water adds sodium. This can cause
abrupt browning of plants or simply poor growth.
Shelf Life:
• Plant food nutrients can be stored unopened for 2 years at room temperature without exposure
to sunlight.
• Plant food nutrients that have been dissolved in water can be stored for 5 months if not exposed
to sunlight.
W
ater
A/B
A/B
Max: 15ml
Shake
For v
egetables,
flo
w
ers,
s and so on.
Plant
Food
100ML
For v
egetables,
flo
w
ers,
s and so on.
Plant
Food
100ML
Water
1L
4L
Nutrient
5ml A + 5ml B
20ml A + 20ml B
3
