Service Manual NeuroLight / AlgiScan - Rev B
8
- The intensity must correspond to that displayed on the AlgiScan display.
Record the result on the sheet final test ENR/13/20-D.
II. Disassembling process
a. Disassembling the housing
1) For the AlgiScan only, unscrew the LEMO connector located on the bottom silicone bumper.
2) For all devices, with a plastic stylus, remove the product name sticker (‘AlgiScan’ or ‘NeuroLight’) to
uncover the screws and then proceed with the front and rear bumpers as well as the silicone eyecup.
