VAC-2000UHD / 4000UHD User’s Guide
23
8.2.3 [ F12 ] Setting external EDID
You can set the HDMI output connector that will be read if EDID type is set to “EXTERNAL (External EDID)”
in “8.2.2 [ F10 ] Setting EDID resolution”.
1. Select the HDMI output connector: Menu numbers:[ F12 ]
2. Select “EXTERNAL (External EDID)”: Menu numbers:[ F10 ] (P.20)
to
OUT 1
OUT 4
LC monitor
Copied EDID
EXTERNAL (External EDID)
BD player
Internal EDID
Step 1
Step 2
[Fig. 8.3] Registering external EDID (VAC-4000UHD)
Setting values
01 to 02:OUT1 to OUT2 (VAC-2000UHD) [Default] OUT1
01 to 04:OUT1 to OUT4 (VAC-4000UHD) [Default] OUT1
Notes:
● Set this menu before setting the EDID resolution to “01 EXTERNAL (External EDID)” in “8.2.2 [ F10 ]
● Set the external EDID again if
- replacing the sink device with the VAC powered on or
- changing the setting of the sink device with the VAC powered on.
8.2.4 [ F14 ] Setting copied EDID
You can select the copied EDID data.
EDID copied (in 8.2.1
[ F01 to F03 ] Copying EDID) from sink devices are saved
in three areas.
~
OUT 1
OUT 4
LC monitor
Copied EDID
EXTERNAL (External EDID)
BD player
[ F14 ] Setting copied EDID
Internal EDID
Copied data 2
Copied data 1
Copied data 3
[ F01
~
F03 ] Copying EDI
[ F10 ] Setting EDID resolution
[Fig. 8.4] Setting copied EDID (VAC-4000UHD)
Setting values
01 to 03: Copied data 1 to 3 [Default] Copied data 1
Note:
Set this menu before setting the EDID resolution to “02 Copied EDID” in “8.2.2 [ F10 ] Setting EDID