IDK SWC-2000, Manual, Page: 31 / 32

SWC-2000 Command Guide
31
3.2.6 Advanced setting
@GLS / @SLS Locking/Unlocking Control command button and standby button lock
Function Getting Setting
Format
@GLS @SLS, lock
Return value
@GLS, lock @SLS, lock
Parameter lock: Locking/Unlocking control command button and standby button
0 = Unlocking [Default]
1 = Locking
2 = Changing the current setting
Example
@GLS
@GLS,1
Getting the control command buttons and
standby button lock status
Locking
@SLS,1
@SLS,1
Locking the control command buttons
and standby button
Completed
Remarks You can lock/unlock these buttons by pressing and holding
the “KEYLOCK” button.
@GBZ / @SBZ Buzzer sound for when pressing buttons
Function Getting Setting
Format
@GBZ @SBZ, bz
Return value
@GBZ, bz @SBZ, bz
Parameter bz: Buzzer sound
0 = OFF, 1 = ON [Default]
Example
@GBZ
@GBZ,1
Getting the buzzer sound setting
ON
@SBZ,1
@SBZ,1
Enabling buzzer sound
Completed
Remarks
－
@GIV Version
Function Getting
Format
@GIV
Return value
@GIV, id, ver
Parameter id : Model number
ver : Firmware version
Example
@GIV
@GIV,SWC-2000,1.00
Getting the product information
Model number and firmware version are
replied
Remarks
“
@GIV
” is valid, even if the standby button is “OFF”.