NJR-T01UHD/NJR-R01UHD Command Guide
23
4.5.2.2 Setting output
@GDM / @SDM
Output mode
Function
Getting
Setting
Format
@GDM, device, ch, reserved
@SDM, device, ch, port, mode
Return value
@GDM, device, ch, reserved, mode_1 (,
mode_2)
@SDM, device, ch, port, mode
Parameter
device: Model
1 = NJR-T01UHD, 2 = NJR-R01UHD
ch: Channel
1 to 512 = Input channel 1 to Input channel 512
If a command is input from the RS-232C connector of NJR-01UHD or from the
IP-NINJAR Configurator, “1” is set (fixed).
reserved: Reservation
“1” fixed
port: Output connector
NJR-T01UHD:
0 = All outputs, 1 = Output connector for extension,
2 = HDMI output connector
NJR-R01UHD:
1 = HDMI output connector
mode_1 to mode_2, mode: Output mode
0 = AUTO [Default], 1 = DVI output, 2 = RGB output,
3 = YCbCr4:2:2 output, 4 = YCbCr4:4:4 output, 5 = YCbCr4:2:0 output
NJR-T01UHD:
mode_1 = Output connector for extension, mode_2 = HDMI output connector
NJR-R01UHD:
mode_1 = HDMI output connector
Example
@GDM,1,1,1
@GDM,1,1,1,0,4
Getting the output mode of NJR-T01UHD Channel 1
Output connector for extension : AUTO,
HDMI output connector : YCbCr4:4:4 output
@GDM,2,1,1
@GDM,2,1,1,0
Getting the output mode of NJR-R01UHD Channel 1
AUTO
@SDM,1,1,2,4
@SDM,1,1,2,4
Setting the output mode of Channel1’s HDMI output
connector (NJR-T01UHD) to YCbCr4:4:4 output
Completed
Remarks
－
