NJR-T01SDI Command Guide
12
3.3 External control from NJR-CTB
Connecting a control device to the NJR-CTB’s LAN connector enables system control and status queries per
the Command List.
For operations from the NJR-CTB, refer to the Command Guide of NJR-CTB.
MAINTENANCE connector
Tablet
M
A
INT
E
NA
NCE
NJR-CTB
PC for control
LAN cable
*2
Communication
command
TCP: 1100
Command
server
WEB
server
Browser
HTTP: 80
LA
N
LAN connector
HUB
LAN cable
*1
10 GbE switch
Cable for
extension
NJR-T01SDI
NJR-CTB
NJR-T01SDI
The LAN connector of NJR-CTB should be connected to the LAN connector of IP-NINJAR products or the 10 GbE switch.
*1
PC for control should be connected to the MAINTENANCE connector of NJR-CTB or the LAN connector of IP-NINJAR products.
*2
NJR-T01SDI
IP-NINJAR series decoders
IP-NINJAR series decoders
Cable for
extension
LAN connector
[Fig. 3.6] Connecting to NJR-CTB
3.4 Connecting LAN cable
When connecting a LAN cable to NJR-T01SDI / NJR-CTB, avoid making a network loop.
The NJR-T01SDI sends broadcast packets periodically for the purposes of internal system management.
*A broadcast storm occurs when a network is overwhelmed by continuous broadcast traffic resulting in a
network meltdown.
During installation, it is important to avoid the creation of network loops. Contact IDK if you require assistance
with network implementation.
