MSD-804FD
User’s Guide
13
2
Features
■ Video
・
Up to QWXGA(Reduced Blanking), 1080p
・
Digital cable EQ
Input: up to 32.8 ft. to 98.43 ft. approx. (10 m to 30 m)
Output: up to 32.8 ft. to 164 ft. approx. (10 m to 50 m)
・
Extending signal up to 328.08 ft. (100 m) over a Cat6 cable (optional extra)
・
Scan converter
・
Aspect ratio control
・
Seamless switching
・
Anti-snow*
1
■ Audio
・
A/D, D/A conversion
・
Audio level adjustment
・
Lip sync
■ Control input
・
RS-232C, LAN
■ Control output
・
Control command output (such as controlling projectors)
・
PJLink
・
Power control of sink device over CEC*
2
■ Others
・
EDID emulation
・
Video and audio can be switched separately
・
Preset memory
・
Cross point memory
・
Last memory
・
Connection reset*
3
・
Key lock
*
1
The anti-snow function automatically fixes snowy noise that is a specific symptom of HDCP-compliant
signals and mainly occurs at start-up. This feature does not work when snowy noise has already been
occurred during startup or when it occurs due to bad condition of the transmission line.
*
2
The display device needs to support CEC to enable this function. Some display devices cannot be
controlled by CEC.
*
3
For digital systems, some problems, such as an HDCP authentication error, can be recovered by
physically disconnecting and reconnecting the digital cables. However, the Connection Reset function
will fix these problems automatically without the need to physically plug and unplug the cables, by
creating the same condition as if the cable were physically disconnected and reconnected. This
function works only for the MSD
’s output.
