MSD-62 series Command Guide
82
@GSB / @SSB
Subnet mask
Getting
Command
@GSB
Response
@GSB, unit_1, unit_2, unit_3, unit_4
Setting
Command
@SSB, unit_1, unit_2, unit_3, unit_4
Response
@SSB, unit_1, unit_2, unit_3, unit_4
Parameter
unit_1 : Upper bit of the subnet mask to unit_4: lower bit of the subnet mask
0 to 255 = 8 bit (Decimal notation) [Default] 255.255.255.0
Getting
example
Command
Response
@GSB
@GSB,255,255,192,0
Description Getting the set subnet mask of the MSD.
Subnet mask: 255.255.192.0 ( = 18 bit)
Setting
example
Command
Response
@SSB,255,255,192,0
@SSB,255,255,192,0
Description Setting subnet mask to 255.255.192.0 ( = 18 bit).
Remarks
If IP address or RS-232C communication setting is changed, the communication
may be disabled. Change the environmental settings based on the MSD settings.
@GGW / @SGW
Gateway address
Getting
Command
@GGW
Response
@GGW, unit_1, unit_2, unit_3, unit_4
Setting
Command
@SGW, unit_1, unit_2, unit_3, unit_4
Response
@SGW, unit_1, unit_2, unit_3, unit_4
Parameter
unit_1: Upper bit of the gateway address to unit_4: lower bit of the gateway
address
0 to 255 = 8 bit (Decimal notation) [Default]192.168.1.200
Getting
example
Command
Response
@GGW
@GGW,192,168,1,254
Description Getting the set gateway address.
Gateway address: 192.168.1.254
Setting
example
Command
Response
@SGW,192,168,1,254
@SGW,192,168,1,254
Description Setting gateway address to 192.168.1.254.
Remarks
If IP address or RS-232C communication setting is changed, the communication
may be disabled. Change the environmental settings based on the MSD settings.
