MSD-62 series Command Guide
109
@GZP / @SZP
Display position
Getting
Command
@GZP, ch
Response
@GZP, ch, position_1, position_2, position_3,
･･･
, position_4
Setting
Command
@SZP, ch_1, bitmap_1, position_1 (, ch_2, bitmap_2, position_2
･･･
)
Response
@SZP, ch_1, bitmap_1, position_1 (, ch_2, bitmap_2, position_2
･･･
)
Parameter
ch: Output channel
1 = OUT1 to 8 = OUT8
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
position_1-8: Display position
0 = CENTER [Default], 1 = TOP-LEFT,
2 = BOTTOM-LEFT,
3 = TOP-RIGHT,
4 = BOTTOM-RIGHT
Getting commands: registered bitmap settings is returned in order.
bitmap_1-8: Bitmap number
0 = All bitmaps,
1 = Bitmap 1,
2 = Bitmap 2,
3 = Bitmap 3,
4 = Bitmap 4
Only registered numbers can be specified.
Getting
example
Command
Response
@GZP,1
@GZP,1,1,1,1,1
Description Getting the display position of OUT1.
Displaying at TOP-LEFT.
Setting
example
Command
Response
@SZP,1,1,1
@SZP,1,1,1
Description Setting bitmap 1 that is output from OUT1 to be displayed at TOP-LEFT.
Remarks
－
