MSD-501/502/701/702 User
’s Guide
51
7.8.3 Synchronous signal output with no input video
Menu Top
→
OUTPUT SETTING
→
SYNC OUTPUT
Setting for Each output (COMMON TO OUTA AND OUTB)
Setting value ON [Default], OFF
You can set whether synchronous signal is output when no video signal is input from the selected input, or
when ”OFF” is selected for the input. If you set this menu to “ON”, you can prevent the sink device from being
switched to the standby mode.
7.8.4 Output video with no input video
Menu Top
→
OUTPUT SETTING
→
VIDEO OUTPUT
Setting for Each output (COMMON TO OUTA AND OUTB)
Setting value
・
BLUE [Default]
・
BACKGROUND COLOR
・
BLACK
You can set the color of the video to be output when no video signal is input from the selected input. If you set
“
7.8.3 Synchronous signal output with no input video
” to “OFF”, no video is displayed on the sink device
since no synchronous signal is output.
7.8.5 Window transition effect
Menu Top
→
OUTPUT SETTING
→
VIDEO SWITCHING
Setting for Each output (COMMON TO OUTA AND OUTB)
Setting value
・
CUT
・
LEFT
→
RIGHT WIPE
・
TOP
→
BOTTOM WIPE
・
FADE OUT-IN
・
RIGHT
→
LEFT WIPE
・
BOTTOM
→
TOP WIPE
・
FREEZE
→
FADE OUT-IN [Default]
You can select a window transition effect for when the video inputs is switched.
The setting will be valid
also when “
7.6.5 Automatic detection of input video interruption
” is set to “ON”.
7.8.6 Window
transition speed
Menu Top
→
OUTPUT SETTING
→
SWITCHING SPEED
Setting for Each output (COMMON TO OUTA AND OUTB)
Setting value 100ms to 2000ms (per 10 ms.) [Default]: 350 ms.
You can set the window transition speed for FADE OUT/IN or WIPE OUT/IN when the input channel is
switched.
The setting will be valid
also when “
7.6.5 Automatic detection of input video interruption
” is set to “ON”.
