IDK ICP-401UHD, User Manual, Page: 53 / 79

ICP-401UHD User Guide
53
8.7.2 Aspect ratio of sink device
Menu Top
→
OUTPUT TIMING
→
OUTPUT ASPECT
Setting value
・
AUTO [Default]
・
16:10
・
4:3
・
64:27
・
5:3
・
256:135
・
5:4
・
FINE
・
16:9
You can set the aspect ratio of the connected sink device.
If you select “AUTO,” the aspect ratio of the resolution selected in “ 8.7.1 Output resolution ” will be applied.
If aspect ratios of the target sink device and the resolution selected in “ 8.7.1 Output resolution ” are different
from each other, you can select an aspect ratio for the sink device of: “4:3”, “5:4”, “5:3”, “16:9”, “16:10”, “64:27”,
“256:135”, and “FINE”.
If you select “FINE”, you can specify the aspect ratio range of 0.33333 to 3.00000.
8.7.3 Test pattern
Menu Top
→
OUTPUT TIMING
→
OUTPUT TEST PATTERN
Setting value [Fig. 8.15] Test pattern
The resolution that is set in “ 8.7.1 Output resolution ” will be applied while a test pattern is displayed.
Test pattern is output on full screen with the resolution set in “ 8.7.1 Output resolution ”.
OFF [Default]
GREEN RASTER
BLUE RASTER COLOR BAR
V-STRIPES
CROSS HATCH
WHITE RASTER
RED RASTER
8STEP GLAY V-RAMP
[Fig. 8.15] Test pattern