HDC-RH401/201/101 Users Guide
41
8.14 [ F32 ] Setting DTS-HD Audio
You can set the maximum sampling frequency of DTS-HD Audio that is output from the source device.
44: 44.1 kHz
48: 48 kHz
88: 88.2 kHz
96: 96 kHz
176: 176.4 kHz
192: 192 kHz
oFF: OFF [Default]
Notes:
● Some LCD monitors do not support some audio formats. Select the audio format and sampling frequency
supported by your device.
● This is enabled only if one of 03 to 22 is selected for resolution setting of EDID.
・
Setting by menu
Normal condition (OFF)
↓ SET key
“
－
” “
＋
” key set INPUT DTS-HD Audio
→ select F32
↓ SET key
“
－
” “
＋
” key set DTS-HD Audio [Default: OFF]
OFF 44: 44.1 kHz 48: 48 kHz
88: 88.2 kHz 96 96kHz
176: 176.4 kHz 192: 192 kHz
↓
During DTS-HD Audio setting is processing, READY LED is OFF. After setting is finished, the
LED is ON
↓
After processing, 7-SEGMENT LED goes back to menu.
