FDX-64 Users Guide
55
7.9.3 Editing preset memory [PRESET EDIT]
Using menu
PRESET MEMORY → PRESET EDIT
Set value
The first page
01 to 32: Preset memory number 1 to 32
[xxxxxxxxxx]: Preset memory name (up to 10 characters in ASCII code)
The second page
OUT1 to OUT64: Selecting output channel
V: ---, 1 to 64, OFF: Setting input channel of the FDX [Default]
“
---
“ (not controlled)
A: ---, 1 to 64, OFF: Setting input channel of the Audio unit (optional) [Default]
“
---
“ (not controlled)
When preset memory is loaded, output whose setting is
“
---
“ (not controlled) is not switched.
All preset memories are set to
“
---
“ (not controlled) by factory default.
Output channel 1 = Input channel 1
Output channel 2 = Input channel 2
Output channel 3 = Input channel 3
Output channel 4 = Input channel 4
…
Output channel 63 = Input channel 63
Output channel 64 = Input channel 64
Current I/O channel status
Output channel 1 = Input channel 3
Output channel 2 = Not control (---)
Output channel 3 = Input channel 1
Output channel 4 = Not control (---)
…
Output channel 63 = Input channel 29
Output channel 64 = Not control
Current settings of preset memory 1
Load
I/O channel status after
loading preset memory
Output channel 1 = Input channel 3
Output channel 2 = Input channel 2
Output channel 3 = Input channel 1
Output channel 4 = Input channel 4
…
Output channel 63 = Input channel 29
Output channel 64 = Input channel 64
Settings is not changed
[Fig. 7.10] Loading edited preset memory
Notes:
● If you do not press the “SET” key, the setting is not changed.
● Do not turn off the FDX while “Saving.” is displayed, otherwise, the setting information may be lost.
