FDX-32 Command Guide
35
@GHU / @SHU
Input HUE
Function
Getting
Setting
Format
@GHU,in_ch
@SHU,in_ch,hue
Return value
@GHU,in_ch,hue
@SHU,in_ch,hue
Parameter
in_ch : Input channel
1 to 32 = INPUT1 to INPUT32
- 1 = Input slot board is not installed..
- 2 = Scan converter output slot board is not installed..
- 3 = Video is not input.
hue : Input video hue correction value
0 = 0
°
[Default]
0 to 359 = 0
°
to 359
°
Example
@GHU,1
@GHU,1,0
Getting the current input HUE of Input
channel1.
It is set to “0°”.
@SHU,1,0
@SHU,1,0
Setting input HUE of Input channel1 to
“0°”.
Completed normally.
Remarks
Supported since firmware ver.2.xx.
@GSR / @SSR
Input saturation
Function
Getting
Setting
Format
@GSR,in_ch
@SSR,in_ch,saturation
Return value
@GSR,in_ch,saturation
@SSR,in_ch,saturation
Parameter
in_ch : Input channel
1 to 32 = INPUT1 to INPUT32
- 1 = Input slot board is not installed..
- 2 = Scan converter output slot board is not installed..
- 3 = Video is not input.
saturation : Input video saturation correction
100 = 100% [Default]
0 to 200 = 0 % to 200 %
Example
@GSR,1
@GSR,1,100
Getting the current input saturation
correction of input channel1.
It is set to “100%”.
@SSR,1,100
@SSR,1,100
Setting input saturation correction of input
channel1 to “100%”.
Completed normally.
Remarks
Supported since firmware ver.2.xx.
