IDK FDX-12UHD User Manual Download

Page: 49 / 80

FDX-12UHD User’s Guide

8.5.4 Deep Color input

Menu Top

→

EDID

→

DEEP COLOR INPUT

Setting for

Each input connector (IN1 to IN1.2)

Setting value

24Bit: 24 bit / pixel ( 8 bit / component) [Default]

30Bit: 30 bit / pixel ( 10 bit / component)

36Bit: 36 bit / pixel (12 bit / component)

You can set the Deep Color that is output from the source device.

The setting will be applied only if the EDID resolution is set to one of “05” to “46”.

【

See: 8.5.1 EDID resolution

】

Notes:

・

Ensure to press the “MENU/SET” key to apply the setting.

・

If you set this function to “30 bit / pixel (10 bit / component)” or “36 bit/pixel (12 bit / component)”,

the transmission clock frequency is increased. As a result, noise may appear when a bad-condition cable or

long cable is connected. In such a case, set this menu to “24 bit / pixel (8 bit/component)”.

・

For 4K@50 / 59.94 / 60 (YCbCr 4:4:4), “24 bit / pixel (8 bit / component)” is selected automatically.

・

Channels that do not have an input slot board cannot be selected in this menu.

Summary of Contents for FDX-12UHD

















































































Search results

Summary of Contents for FDX-12UHD

Reviews:

Related manuals for FDX-12UHD

Brands by name

Popular brands

IDK FDX-12UHD, User Manual

Search results

Summary of Contents for FDX-12UHD

Reviews:

Related manuals for FDX-12UHD

Brands by name

Popular brands