DFS-01UHD / DFS-01HD User’s Guide
31
8.5 Setting input timing
The DFS monitors input video signals at all times to set input timing automatically.
You can also set the timing parameters for input video manually.
8.5.1 Start position
Menu Top
→
INPUT TIMING
→
INPUT H POSITION (Horizontal) / INPUT V POSITION (Vertical)
Setting for Each input signal
Setting value [Table 8.2] Start position setting
[Table 8.2] Start position setting
Function
Setting value
Horizontal start position
-100 DOT to +10 0DOT
[Default] +0 DOT
Vertical start position
-30 LINE to +30 LINE
[Default] +0 LINE
You can set the horizontal/vertical starting position.
If no signal is input, “No Signal” is displayed on the LC display.
8.5.2 Active area
Menu Top
→
INPUT TIMING
→
INPUT H SIZE (Horizontal) / INPUT V SIZE (Vertical)
Setting for Each input signal
Setting value [Table 8.3] Active area setting
[Table 8.3] Active area setting
Function
Setting value
Horizontal active area
-100 DOT to +100 DOT
[Default] +0 DOT
Vertical active area
-30 LINE to +30 LINE
[Default] +0 LINE
You can set the horizontal/vertical active area of input video.
If no signal is input, “No Signal” will be displayed on the LC display.
(
－
): The vertical video will be shrunk according to the sink device.
(
＋
): The horizontal video will be enlarged according to the sink device.
