DFS-01UHD / DFS-01HD User’s Guide
29
8.4 Setting output
8.4.1 Output mode
Menu Top
→
OUTPUT SETTING
→
OUTPUT MODE
Setting value
HDMI RGB : HDMI RGB mode [Default]
DVI
: DVI mode
HDMI 422
: HDMI YCbCr4:2:2 mode
HDMI 444
: HDMI YCbCr4:4:4 mode
HDMI 420
: HDMI YCbCr4:2:0 mode
**
** Only for DFS-01UHD
You can select an output signal mode and color space of the output video.
The selected mode has priority, but the most optimal mode for the sink device will be used to output signals.
8.4.2 Output mode for EDID error
Menu Top
→
OUTPUT SETTING
→
OUTPUT HDMI MODE
Setting value
OFF
: Treated as DVI when EDID reading error occurs [Default]
ERROR1 : Treated as HDMI without SCDC when EDID reading error occurs
ALWAYS1
: Treated as HDMI without SCDC all the time
ERROR2 : Treated as HDMI with SCDC when EDID reading error occurs
**
ALWAYS2 : Treated as HDMI with SCDC all the time**
**
Only for DFS-01UHD
The DFS acquires EDID from the sink device and determines if the sink device is an HDMI device or DVI
device in order to output HDMI signals. However, if the DFS cannot acquire EDID for some reasons, problems
such as no audio onput and the like may occur. In these cases, DFS recognized the connected sink device is
HDMI or DVI device and output signal as HDMI or DVI mode depending on its setting.
Notes:
・
If you use this setting for forced HDMI signal output, set the resolution of the EDID to a resolution other than
“EXTERNAL (External EDID)” and set the EDID according to the resolution of the target sink device.
・
This menu is available when HDMI signal is input and output mode is set to a value other than “DVI”.
【
See: 8.9.1 Resolution
【
See: 8.4.1 Output mode
