IDK DFS-01UHD, Command Reference Manual

Page: 21 / 44

DFS-01UHD/DFS-01HD Command Guide
21
3.3.4 Input timing
@GPI / @SPI Start position
Getting Command @GPI
Response @GPI, h_posi, v_posi
Setting Command @SPI, h_posi, v_posi
Response @SPI, h_posi, v_posi
Parameter h_posi: Horizontal start position (Dot)
-100 to +100 [Default] +0
v_posi: Vertical start positon (Line)
-30 to +30 [Default] +0
Getting
example Command
Response
@GPI
@GPI,+0,+0
Description Getting the start positions
Horizontal and Vertical start positions: 0
Getting
example Command
Response
@GPI
@GPI,-3
Description No input signal
(If no input signal is input, “@GPI,-3 ” will be replied.)
Setting
example Command
Response @SPI,0,0
@SPI,0,0
Description Setting the horizontal and vertical start positions to “0”
Remarks If no signal is input, the setting command is not applied.
@GSI / @SSI Active area
Getting Command @GSI
Response @GSI, h_size, v_size
Setting Command @SSI, h_size, v_size
Response @SSI, h_size, v_size
Parameter h_size: Horizontal active area (Dot)
-100 to +100 [Default] +0
v_size: Vertical active area (Line)
-30 to +30 [Default] +0
Getting
example Command
Response
@GSI
@GSI,+0,+0
Description Getting the active area
Horizontal and Vertical active area: 0
Getting
example Command
Response @GSI
@GSI,-3
Description No input signal
(If no input signal is input, “@GSI,-3 ” will be replied.)
Setting
example Command
Response @SSI,0,0
@SSI,0,0
Description Setting the horizontal and vertical active areas to “0”
Remarks If no signal is input, the setting command is not applied.