Part 1 - Getting Started
17
•
Fan Error
: Event is indicated when the cooling fan
cannot reach a certain RPM or fails for longer than 50
seconds.
•
No Storage Found:
It will be highlighted when no
recordable storage device has been found.
•
Disk Almost Full
/
Disk Full
: If the storage device is
not in
Recycle
status, event status is displayed when
the amount of disk space specified under
System
Monitoring
is reached and when the disk becomes
100% full. For more information, refer to the
.
•
Disk Config Change
: It will be highlighted when
the DVR reboots after the hard disk drive has been
replaced.
Storage
Indicates each disk’s status.
Configure Disk Bad and Disk Temperature settings under
Setup
>
System
>
System Event
.
Disk Bad
Not
Formatted
A disk that has never
been used before.
Good
• Disk performing
normally.
• If the HDD is partially
damaged, indicates
the bad sector
percentage.
Error
• If the HDD's bad sector
ratio is higher than
as designated by the
user.
• Generates a system
event.
Temperature
N/A
Unable to detect the
disk's temperature.
Good
Operating within normal
temperature range.
Bad
• Disk temperature
higher than as
designated by the
user.
• Generates a system
event.
S.M.A.R.T.
N/A
A disk that does not
support S.M.A.R.T.
Good
A disk with normal
S.M.A.R.T. status.
Bad
A disk with abnormal
S.M.A.R.T. status.
Possibility of damage
within 24 hours.
