Part 2 - Configuration
30
System Event
Use this option to configure Monitoring settings.
•
Settings
: Configure when and what the system
should monitor for.
•
Actions
: Configure notification (email, LAN1 through
5, push, alert window) settings.
Monitoring Options
System
Define monitoring times. If self-
diagnosis is not performed on
a regular basis, the system will
assume an error.
Bootup, Restart,
Shutdown
Define bootup, restart and
shutdown actions.
Panic Record
Define panic recording actions.
Check Recording
The system will assume an error
if the system has been scheduled
to record normally but recording
does not take place during
scheduled intervals.
Select
Schedule On
and then
configure the days of the week,
times, and monitoring interval.
Select the button on the
bottom left of the screen to
add a schedule. Select icon
to delete the schedule.
Disk Almost Full
Generates an event if the disk
reaches the specified capacity
(80% to 99%).
Disk Full
Generates an event when all
disks reach their maximum
capacity.
Disk Bad
Generates an event when the
specified percentage of the
disk becomes damaged. Set to
between 10% and 90% in 10%
intervals.
