Part 1 – Introduction
9
I/O Device Port
1
2
3
1
Power In (DC 12V)
2
BNC Video Out (Yellow Cable)
3
OSD Button
•
Power In (DC 12V)
Connect it to the power adapter (DC 12V).
•
BNC Video Out
Connect it to the DVR.
•
OSD Button
Use the button to set the OSD menu.
You can change the video output format by using the
OSD button.
•
CVBS
: Press the
UP
button three times, and then
press the center of the OSD button.
•
TVI
: Press the
LEFT
button three times, and then
press the center of the OSD button.
•
AHD
: Press the
RIGHT
button three times, and then
press the center of the OSD button.
The following table describes the coaxial cable
specifications.
<The coaxial cable specifications>
Item
Content
Note
Connector
BNC
Cable
3C-2V
5C-2V
Maximum
length
300m
500m
Installation
Installation of this product does not require the use of
special tools.
For more information on other devices comprising the
overall system, refer to their respective
installation
manuals
.
Product color and design may vary depending on the
model.
Removing the Dome Cover
Turn the dome cover to remove it from the body.
