Idis IR-100, Quick Manual

Page: 8 / 25

Part 1 – Product Information
8
1
Power In
Connect a power cord.
2
Audio Out
Connect an amplifier (Line-out). The NVR does not
have amplified audio output, so you will need a
speaker with an amplifier.
3
RS232
Connect a remote control device for RS232
communication.
4
VGA (D-Sub)
Connect an HD (High-Definition) PC monitor which
supports a D-Sub interface. Connect a monitor before
turning on the system. Video might not be displayed
on the monitor when connecting a monitor after
turning on the system.
5
E-SATA
Connect an external hard disk drive which supports an
eSATA interface.
6
USB
Connect USB devices such as a mouse, keyboard, USB
storage device or printer.
7
DP
Connect an HD (High-Definition) PC monitor which
supports a DP interface.
8
HDMI
Connect an HD (High-Definition) PC monitor which
supports an HDMI interface.
9
Network
Connect a CAT 5e or higher cable with an RJ-45
connector.
• The location of ports in slots can be different from
the image above.
• If the LAN 1 and LAN 2 is connected to the same
network, the system may malfunction.
Rear Panel
1
Power In
2
Audio Out
3
RS232
4
VGA (D-Sub)
5
E-SATA
6
USB 3.0
7
DP
8
HDMI
9
USB 2.0
0
Network