10
• The password must be entered only with the
virtual keyboard.
• FEN service must be enabled to use find
password functionS.
3
Enter an UPR(User Password Reset) verification and
then click on
UPR Verification
button.
4
Select the UPR file and then click on
Import
button.
• To use UPR function, the UPR file must be saved
in advance.
• You can reset the password using an encrypted
UPR (User Password Reset; filname extension
* .upr) file.
• It can be used as USB flash driver on local pc,
but not remotely.
• Only files exported from the same device are
available.
• If you lose the UPR file and change the
password of the NVR, the UPR file may not be
used.
5
To set a new password, click the question mark button
in the lower left corner and follow the instructions.
Basic Feature
Live Mode
Once Camera Registration is complete, the system will enter
Live Mode.
Press the
MENU
button on the remote control while in Live
mode to bring up the Live menu on the top of the screen.
Press
MENU
once more to hide the menu. Use the Arrow
buttons on the front panel of the NVR or the remote control
to select the menu options.
Video Recording
Records the live video.
Refer to the manual for more information.
Panic Recording
Select
Live
or
Search
menu's Panic Recording icon or
press the
Panic Recording
button on the front panel or
the remote control to commence panic recording on all
registered cameras.
To stop Panic Recording, select the Panic Recording
icon or press the
Panic Recording
button again. If the
Panic Recording Duration
option under
Record Setup
> General
has been configured, Panic Recording will
automatically terminate after the specified duration of time
has elapsed.
• Panic Recording takes place irrespective of any
recording schedule set up by the user.
• Panic Recording video profile from
Record Setup –
General
applies to all Panic Recording videos.
Panic Recording will not take place if recording mode
is not set to
Recycle
and the HDD has reached 100%
of its capacity.
