Part 2 - Configuration
79
●
Exceed the People Limit
- Condition:
When a specific event occurs, you can
set the condition that determines whether to operate
motion according to the status of other events
.
–
Reference Only
: Set the event to be the subject of
a reference.
–
Event
:
Set the reference event.
–
Channel
:
Set the reference channel.
●
Actions:
Specify which actions to take when an event
occurs.
–
Record:
Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
–
Alarm-Out:
Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
–
Notify:
Configure to be notified of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
–
PTZ:
Moves the PTZ camera to a specific preset
position when an event occurs.
–
Event Monitoring:
Selects the cameras to monitor
when an event occurs.
•
In order to use the Callback feature, the NVR must
be registered on the remote program.
•
In order to use the Exceed the People Limit
feature, Queue Management should be set on the
channel.
VA Box_Exceed the Time Limit
This event occurs when people stay in a defined area
longer than the time set.
●
Setup
: Configure Exceed the Time Limit event.
–
Exceed the Time Limit
: When people stay in a
defined area longer than the time set, an event
occurs.
●
Exceed the Time Limit
- Condition:
When a specific event occurs, you can
set the condition that determines whether to operate
motion according to the status of other events
.
–
Reference Only
: Set the event to be the subject of
a reference.
–
Event
:
Set the reference event.
–
Channel
:
Set the reference channel.
