background image

8

English

 - Mode: Select the scan mode.
 - Advanced Setup: If the camera is networked but 

not scanned, use this setup. This setup allows you to 
change the network setting of the NVR’s VIDEO IN 
port which is camera’s network environment. Check 
the camera’s network setting first before you use this 
setup. Make sure that this setting does not conflict 
with the WAN setting. For more information on the 
WAN setting.

Select 

Scan

 to commence scanning.

Select a camera from the scan list and then select 

Add 

Camera

. The Device Login window will appear.

Enter a 

User ID

 and a 

Password

 for the selected 

camera.

Camera View Buttons

 

ALIGNMENT 

 

Button: Realigns camera screens 

displayed on the video display area in the order of 

Video 

In

 port connections.

 

RESET

 

 Button: Refreshes the video display area and 

the camera list.

 

TOOL

  

Button: Displays netcwork camera tool 

window and changes the camera protocol.

Camera List Area

Following options can be accessed by right-clicking on a 
camera list entry:

 

Add/Remove Camera

: Adds or removes the selected 

camera. The Add Camera option is inactive if the camera 
has already been added to the screen.

 

Authentication

: Enter the necessary camera login info. 

This option is inactive for DirectIP™ cameras because 
they do not require logins.

Video Display Area

Left-click on the video display area to toggle between split 
screen and single screen modes.
Drag the camera screens around to rearrange them.

Apply/Cancel Buttons

While in Camera Registration mode, select 

Apply

 to register 

all changes.
Select 

Cancel

 to exit Camera Registration mode without 

applying the changes.

It is not possible to register a camera that has already 
been registered to a different NVR.

Diagnosis Process

When the camera is registered to the NVR, 

Self-diagnosis

 

runs automatically for the new registered and changed 
cameras. If 

Self-diagnosis

 is processing,

 Diagnosis 

Processing

 message will be displayed.

If 

Self-diagnosis

 is failed, 

Diagnosis Requirement

 

message will be displayed. In this case, you can run 

Self-

diagnosis

 manually.

Login

Configuring the NVR's settings and accessing its searching 
and other functions require an authorized user login.

Bring up the Live menu and either press the 

Setup

 

button on the remote control or click on   (Log in) 
using the mouse.

Summary of Contents for DR-6216P-S

















Reviews: