background image

Part 2 - Configuration

77

Disk Bad

Not 
Formatted

A disk that has never 
been used before.

Good

 

Disk performing 
normally.

 

If the HDD is partially 
damaged, indicates 
the bad sector 
percentage.

Error

 

If the HDD's bad 
sector ratio is higher 
than as designated 
by the user.

 

Generates a system 
event.

Temperature

N/A

Unable to detect the 
disk's temperature.

Good

Operating within 
normal temperature 
range.

Bad

 

Disk temperature 
higher than as 
designated by the 
user.

 

Generates a system 
event.

S.M.A.R.T.

N/A

A disk that does not 
support S.M.A.R.T.

Good

A disk with normal 
S.M.A.R.T. status.

Bad

A disk with abnormal 
S.M.A.R.T. status. 
Possibility of damage 
within 24 hours.

 

Check each disk's data storage time information 
under 

Recording Data

.

 

For the DR-6200P and DR-4200P series, clicking the 
temperature, S.M.A.R.T can check the each HDD 
information.

Network

This page provides a complete overview of the network 
status in real-time.

Information shown include camera connection status, 
LAN port link status, power consumption, number of 
connected clients, and network connection info.

Summary of Contents for DR-6100P Series


































































































Reviews: