Part 1 – Introduction
8
Overview
Product color and design may vary depending on the model.
Body
2
3
4
1
5
6
1
Lens
2
IR LED
3
Body
4
Stand
5
Installation Bracket
6
Sun Shield Screw Hole
•
Lens
Motorized focus and zoom lens is installed.
•
IR LED
A sensor in the bottom middle monitors lighting
levels and activates the IR LED during low-lighting
conditions.
•
Body
The cables are connected through the stand.
•
Stand
Allows you to adjust the camera direction and lens’
rotation angle.
•
Installation Bracket
Install the camera to on the wall or ceiling.
•
Sun Shield Screw Hole
Connect the screws to secure the camera sunshield
supplied with the product to the camera.
If the camera is not equipped with a
lens, protect the image sensor using the
protective cover provided with the camera.
