Idis DC-Y6516X-A, Quick Manual

Page: 5 / 16

5 Network Camera
3
Insert a SD memory card into the SD memory card
slot with the ‘micro SD’ print facing upward.
microSD
• Push the SD memory card until it
disengages from the slot, and then pull
it out.
• microSD Logo is a trademark of SD-3C,
LLC.
Installation
• Check the wall or ceiling to see if it needs to
be reinforced. The camera may fall off if the
wall or ceiling is not strong enough to support
its weight.
• Install the camera in a shaded area. If the
camera is installed in direct sunlight, it may be
affected adversely.
Use the provided guide pattern to check the
distance between the screw holes if necessary.
1
After you insert the SD memory card in the
camera, secure the body on a wall or ceiling
using the screws and anchors that came with the
camera.
If you install the camera on a wall, check
the direction of the camera body to prevent
image from being turned upside down.
The end of the arrow
should be at the top.
2
Connect external devices, the network cable, and
the power adapter.
3
Secure the top cover to the body by turning it
clockwise.
After securing the top cover, remove the peel
off film from the dome port.