Idis DC-Y6516WRX, Quick Manual, Page: 6 / 12

6 Quick Guide
1
2
3
4
5
6
RJ45 waterproof rubber ring
RJ45 modular jack
RJ45 connector protect cover
cable waterproof rubber ring
(The waterproof rubber ring is fastened to the connector protect cover.)
RJ45 connector back cover
6
Lock the waterproof cap into the waterproof cap
body.
Not pulling the cable back may cause water to seep in
and damage the product.
Installation
• Check the wall or ceiling to see if it needs to
be reinforced. The camera may fall off if the
wall or ceiling is not strong enough to support
its weight.
• Install the camera in a shaded area. If the
camera is installed in direct sunlight, it may be
affected adversely.
Use the provided guide pattern to check the
distance between the screw holes if necessary.
1
Before closing the top cover, place the provided
desiccants (2ea.) in the marked space.
2
After you insert the SD memory card in the
camera, secure the body on a wall or ceiling
using the screws and anchors that came with the
camera.
3
Connect external devices, the network cable, and
the power adapter.
4
Secure the top cover to the body by turning the
screws clockwise with the Allen wrench.