Part 1 – Introduction
14
3
Adjust the camera angle by bending the stand. After
fully assembling the joint screws, unscrew it 2 ~
2.5 turns again and move the cover of the joints of
the left 3 places slightly. (The screws should not be
completely released to prevent it from falling.) After
adjusting the direction of the camera, turn the screw
clockwise to secure it completely.
M4
Screw
4
Connect external devices, network and power
adapter.
5
Apply power.
Dimensions
244.1mm
57.6mm
106.5mm
80mm
27.5mm
Ø 77mm
Ø 90mm
