Part 1 - Remote Setup
21
Miscellaneous
Configure
Miscellaneous
settings.
•
Video Output
: Select a video output signal format.
Set the brightness of the IR LED. The higher the value
is set, the brighter it is.
•
Image Stabilizer:
Disable or enable the image
stabilizer function. When the image stabilizer is
enabled, it reduces blurring caused by camera shake
that results from external conditions such as the wind.
•
Smart IR:
Prevent the object from being saturated by
IR light. Select Auto to control saturation only when
the zone is over-saturated.
Streaming
•
Primary/Secondary/Tertiary/Quaternary:
Multistreaming is supported. Enable/disable
streaming use. The stream you set first has priority.
•
Compression
: Choose the streaming compression
method.
•
Resolution
: Choose a resolution setting for video
streaming. The resolution varies depending on the
camera model.
•
Quality
: Choose a quality setting for video streaming.
•
Target Bitrate(Kbps):
Set the target bitrate. When
Quality
is set to
Manual
, you can configure the value
of the target bitrate. If not, the set value of the target
bitrate for each
Quality
appears.
•
Bitrate Control
: Choose a bitrate control mode for
video compression.
-
CBR (Fixed Bitrate):
Maintains the current bitrate
regardless of motion change in the video.
-
VBR (Variable Bitrate)
: Bitrate varies depending
on motion changes in the video. Less movement
places less load on the network and takes up less
storage space.
•
Frame Rate
: Choose a frame rate setting for video
streaming.
•
Default Record Stream
:
Choose a stream to use
for recording. This setting, however, may not apply
if a recording stream has been designated from the
remote program or the SD memory card recording
feature has been enabled.
•
Intelligent Codec:
Analyze real-time video
intelligently to minimize bitrate while maintaining
frame rate and image quality.
In environments where there are many video changes,
image quality can be reduced.
