Part 1 – Introduction
9
Sun Shield
Bracket
Cable
1
2
1
Video Out (BNC)
2
Network Port
•
Video Out (BNC)
Connect the monitor. Use these ports for previewing
video and not monitoring video.
•
Network Port
Connect a network cable with an RJ-45 connector to
this port. If using a PoE switch, you can supply power
to the camera using an ethernet cable. For more
information on PoE switch use, refer to the switch
manufacturer's operation manual. You can configure,
manage, and upgrade this camera and monitor its
images from a remote computer over the network.
For more information on network connection setup,
refer to the
IDIS Discovery operation manual
.
•
Check your local laws and regulations on making
video recordings. The user will be held liable for any
violation of the law. (Article 25-5 of the Personal
Information Protection Act: Operators of image data
processing devices may not operate such devices
for purposes other than as originally intended
during device installation, place such devices at
locations other than as originally intended, or use
such devices to record audio.)
•
The network connector is not designed to be
connected directly with cable or wire intended for
outdoor use.
