Idis DC- D6233HRX, Quick Manual

Page: 6 / 18

6 Quick Guide
Block the cable access hole for waterproofing
by using the enclosed cable access hole
rubber when routing the thin or several
wires. Waterproofing sealing is required by
using silicone etc. after blocking the cable
access hole. Ask your retailer for details.
3
Assemble the cable rubber to the bottom cover.
4
Attach the enclosed desiccant in the bottom to
prevent moisture.
Desiccant
5
Connect the safety wire with the bracket. Fasten
the screws for the bottom cover clockwise using
the allen wrench provided with the camera.
6
Connect external devices, the network cable, and
the power adapter.
Make sure that the side cable hole is shut
using the cable cap for waterproof if the
hole is not used.
7
Adjust the angle. For more information, refer to the
Angle Adjustment
.
Closing the Dome Cover
Fasten the screws for the dome cover clockwise using
the allen wrench provided with the camera.
Remove the protective film inside and outside
before closing the dome cover.