Idis DC-D4811WRX-A, Quick Manual

Page: 6 / 20

6 Quick Guide
3
Pull the cable slightly and arrange the rubber as
shown below.
If you insert a thin cable or more than two cables,
it is advised to finish by using silicon to make sure
to perfectly waterproof it. (Silicon finishing part —
refer to the bottom image.)
4
Assemble the cable rubber to the bottom cover.
5
Use the screws, anchor provided with the camera
to secure the bottom cover on a wall or a ceiling.
Use the provided guide pattern to check
the distance between the screw holes.
6
Connect external devices, the network cable, and
the power adapter.
7
Adjust the angle. For more details, refer to Angle
Adjustment .