Idis DC-D4513WRX, Operation Manual

Page: 22 / 47

Part 1 - Remote Setup
22
- 5M(4:3) Mode
Primary Secondary Tertiary Quaternary
Resolution ips Resolution ips Resolution ips Resolution ips
2592x1944 30 2592x1944 5
2592x1944 2
1280x960 1
640x480 5
1920X1440 5
1920X1440 1
1280x960 1
640x480 5
1280x960 5
1280x960 4
640x480 15
640x480 30 - -
- 4M(16:9) Mode
Primary Secondary Tertiary Quaternary
Resolution ips Resolution ips Resolution ips Resolution ips
2592x1456 30 2592x1456 15
2592x1456 4
1920x1080 1
1280x720 3
640x360 10
1920x1080 5
1920x1080 3
1280x720 5
640x360 30
1280x720 15
1280x720 4
640x360 4
640x360 30 640x360 2
•
Compression
: Choose the streaming compression
method.
When using H.265 compression, a device that does
not support H.265 compression may prevent the
screen from being displayed.
• Resolution : Choose a resolution setting for video
streaming. The resolution varies depending on the
camera model. The current stream resolution cannot
be higher than the higher stream resolution.
•
Quality
: Choose a quality setting for video streaming.
• Target Bitrate(Kbps): Set the target bitrate. When
Quality
is set to
Manual
, you can configure the value
of the target bitrate. If not, the set value of the target
bitrate for each
Quality appears.
•
Bitrate Control
: Choose a bitrate control mode for
video compression.
-
CBR (Fixed Bitrate):
Maintains the current bitrate
regardless of motion change in the video.
- VBR (Variable Bitrate) : Bitrate varies depending
on motion changes in the video. Less movement
places less load on the network and takes up less
storage space.
•
Frame Rate
: Choose a frame rate setting for video
streaming. The fame rate of the current stream cannot
be higher than the fame rate of the higher stream if
those stream resolutions are same.
• Default Record Stream : Choose a stream to use
for recording. This setting, however, may not apply
if a recording stream has been designated from the
remote program or the SD memory card recording
feature has been enabled.
•
Intelligent Codec:
Analyze real-time video
intelligently to minimize bitrate while maintaining
frame rate and image quality.
• Multi-View Streaming : Designate a specific area of
the screen and stream images from that area only.
(not supported for the primary stream) Click
Setup
to
designate a streaming area.
Select
On
and then specify the streaming area’s
resolution.
-
Resolution Limit
: Indicates the maximum
resolution that can be set for the streaming area.
-
Resolution
: Designate a streaming area.
Designated area is marked in red on the screen. You
can adjust the resolution of the area or reposition
the area by dragging and dropping using the
mouse.
- Current Resolution : Displays the resolution of the
designated streaming area.
If multiple users are connected to the camera, the
increase in bandwidth use can lower the frame rate.