Idis DC-D4218WRA, Quick Manual

Page: 5 / 12

5 Network Camera
Camera Installation
Removing the Dome Cover
1
Loosen the screws counterclockwise using the
Allen wrench provided with the product.
2
Remove the dome cover.
Inserting a SD Memory Card
Insert a SD memory card into the SD memory card slot
with the ‘microSD’ printed facing upward.
micro
SD
Push the SD memory card until it disengages
from the slot, and then pull it out.
Installation
• Check the wall or ceiling to see if it needs to
be reinforced. The camera may fall off if the
wall or ceiling is not strong enough to support
its weight.
• Install the camera in a shaded area. If the
camera is installed in direct sunlight, it may be
affected adversely.
• (If necessary) Attach one end of the safety wire
(not provided) to the wall or ceiling, and the
other end of the safety wire to the installation
location on the camera body.
Safety Wire Screw (Provided)
Safety Wire (Not provided)
1
Remove the protrusion part from the cable rubber
along the dotted line.
2
Insert the LAN cable through the cable rubber
using the protect connector.
The use of lubricant is recommended to insert the
LAN cable smoothly.