7
Network Camera
Block the cable access hole for
waterproofing by using the enclosed cable
access hole rubber when routing the thin
or several wires. Waterproofing sealing
is required by using silicone etc. after
blocking the cable access hole. Ask your
retailer for details.
3
Assemble the cable rubber to the bottom cover.
4
Connect the safety wire with the bracket. Fasten
the screws for the bottom cover clockwise using
the allen wrench provided with the camera.
5
Connect external devices, the network cable, and
the power adapter.
Make sure that the side cable hole is shut
using the cable cap for waterproof if the
hole is not used.
6
Adjust the angle. For more information, refer to the
Angle Adjustment
.
7
Attach the enclosed desiccant in the bottom to
prevent moisture.
Desiccant
DC-D3533RX
1
Push the network cable through the cable rubber,
using the protective connector provided.
Cable rubber
Protect
connector
Cable
2
Assemble the cable rubber to the bottom cover.
3
Use the screws, anchor provided with the camera
to secure the body on a wall or a ceiling.
Use the provided guide pattern to check
the distance between the screws.
English
