Idis DC-D3233RX-N, Quick Manual

Page: 6 / 12

6 Quick Guide
Inserting a SD Memory Card
micro
SD
Insert a SD memory card into the SD memory card slot
with the ‘micro SD’ print facing upward.
Push the SD memory card until it disengages from
the slot, and then pull it out.
microSD Logo is a trademark of SD-3C, LLC.
Installation
• Check the wall or ceiling to see if it needs to be
reinforced. The camera may fall off if the wall
or ceiling is not strong enough to support its
weight.
• Install the camera in a shaded area. If the camera
is installed in direct sunlight, it may be affected
adversely.
1
Push the network cable through the cable rubber,
using the protective connector provided.
Cable rubber
Protect
connector Cable
Block the cable access hole for
waterproofing by using the enclosed cable
access hole rubber when routing the thin
or several wires. Waterproofing sealing
is required by using silicone etc. after
blocking the cable access hole. Ask your
retailer for details.
2
Assemble the cable rubber to the bottom cover.
3
Use the screws, anchor provided with the camera
to secure the install body on a wall or a ceiling.
Use the provided guide pattern to check the
distance between the screws.
4
Connect external devices, the network cable, and
the power adapter.
5
Adjust the angle. For more information, refer to the
Angle Adjustment .