Part 1 - Remote Setup
19
-
3DNR:
Set whether to enable or disable 3DNR
(3D Noise Reduction). When 3DNR is enabled, the
level of background noise is reduced in low light
conditions. It does not cause overall image blurring
which might occur when using noise filter, but it
may cause afterimage (lag).
White Balance
Configure
White Balance
settings.
•
Preset
: Use preconfigured white balance settings.
-
Auto
: Allow the system to adjust the white
balance automatically. The system will assess the
lighting conditions and adjust the white balance
automatically.
-
Hold:
Hold the current white balance.
-
INCANDESCENT - FLUORESCENT COLD
: Select
a lighting type to apply the appropriate white
balance.
If the
Preset
is
Hold
and the WDR mode is changed,
a reset is required.
•
Manual
: Adjust the white balance manually. Adjust
Red and Blue gain values. Greater the value, greater
the intensity of the corresponding color.
If the white balance does not work properly under the
following specific conditions, select
Manual
or
Hold.
- When the surrounding environment of the object is
out of the color temperature correction range
- When the surrounding environment of the object is
dark
- The camera is pointed directly at the fluorescent lamp
or installed in a place where the lighting change is
severe.
